Healthcare Consulting - Top Quality Aesthetic
Alloblast Stem Cell

What is Alloblast Stem Cell Therapy?

Alloblast is one of the most effective methods of slowing down the aging of the skin. This stem cell treatment is obtained from the newborn foreskin and is produced in the laboratory and applied to the problematic areas of the skin.

Alloblast is applied to the face, neck, décolleté, back of the arms, hands, inside the legs, knees, hair and many areas. The effect of this process shows itself in a short time and its effect increases within 3 months. These procedures provide a younger, dynamic, spotless and firm appearance to the skin.

Collagen and elastin lost over time are triggered again by fibroblasts taken from the newborn foreskin and a healthy, young and dynamic skin appearance is created. This process, which has FDA approval, is safely applied to both the face and skin.

What Does Alloblast Stem Cell Therapy Do?

Alloblast stem cell therapy is used for both aesthetic and therapeutic purposes. Depending on aging and various external factors, people’s cells also age and become irreparable. These people also show signs of aging. In addition, it is possible that various diseases may occur with this damage to the cells. If the general health condition of the person is good and only cell renewal is desired due to aging, his own cells can also be used. However, if fibroblst cells obtained from newborn babies and foreskin are used, the effect is achieved much faster.

With the injection of fibroblast cells into people, repair and healing are provided on the cells. This ensures that new cells are produced in place of aging and irreparable cells. In addition, the damaged tissues are repaired and those tissues are restored to their infancy. In short, in the alloblast application performed by injecting fibroblast cells, the cells of the people are returned to their newborn state.

What are The Effects of Alloblast Stem Cell Therapy?

  • The most important effect of this application is to prevent aging for a certain period of time.
  • It tightens the skin as well as prevents aging. And it gives a youthful appearance.
  • It removes wrinkles and sagging on the face and body.
  • Eliminates deep lines on the face.
  • Provides removal of acne, acne and scars.
  • It increases the amount of hair.
  • The alloblast process helps tighten the skin.
  • It makes the skin look brighter and livelier.
  • It removes the collapsed skin structure and collects the loose skin.

In Which Areas is Alloblast Application Used?

Stem cell alloblast application is mostly used for problems that occur on the skin. With aging and unhealthy conditions, some damages occur on the skin of people. Now one’s own cells are tired or weak enough to repair themselves. The cells of a newborn baby are more active and stronger than ever before. Cells obtained from these babies in a completely harmless way are injected into the skin of the person or to the desired area.

The areas where this treatment is applied and effective results are obtained are as follows;

  • Facial rejuvenation for aesthetic purposes
  • In the treatment of deep lines on the face such as nasolabial lines, crow’s feet, brow lines.
  • For general reduction of facial wrinkles
  • When it is desired to add volume to the face
  • To give more vitality and brightness to the skin.
  • Treatment of chronic wounds that are difficult to close and tissue loss
  • For revitalizing hair follicles
  • It is used for the treatment of acne and chickenpox on the face.

Stem cell treatments are used to eliminate the above problems for aesthetic purposes. It should be noted that in addition to aesthetic surgery, it is an effective method in the treatment of some diseases.

In Which Diseases is Alloblast Application Used?

The application of alloblast, the usage area of which is expanding day by day, is preferred in the treatment of different problems.


  • Reducing the effects of aging
  • Treatment of wrinkles, sagging and lines on the skin
  • Tightening of the skin
  • Treatments that involve making the skin appear brighter and brighter
  • Closing acne, acne and scars
  • Recovery of loose skin
  • Facial rejuvenation procedures

What are The Advantages of Alloblast Treatment?

Alloblast therapy, applied as a stem cell therapy, is even more advantageous than other stem cell therapies. That’s why people who opt for treatment achieve great effects.

In general, the advantages of treatment are as follows;

  • First of all, it ensures that very new and healthy cells are injected into your skin.
  • There is no need to take any blood or tissue from you.
  • Requested cells arrive in just a few days and are completely personalized. It is tested and certified specifically for you.
  • It can be easily applied anywhere on the body, including the genital area.
  • Cannula needles are used during the procedure and there is no trace or symptom in the treated area.
  • It is not a painful procedure.
  • Since it is obtained from the tissues of another living thing, it is completely harmless and has no side effects.
  • Stem cell effects are surprisingly good compared to other preferred aesthetic applications. This is perhaps one of the most important advantages of the procedure.

What is The Difference Between Alloblast and Fibrocell?

The differences between the two applications are as follows;

  • In the Fibrocell procedure, tissue is obtained from the back of the person’s ear, and in the Alloblast procedure, tissue is taken from the newborn foreskin.
  • Allogeneic fibroblasts are healthier and younger and act faster than the Fibrocell process.
  • Fibroblast cells do not cause side effects since newborn babies have not yet gained an identity.
  • The number of sessions in Fibrocell application is higher. Sessions need to be determined and carried out in advance.
  • A single session is considered sufficient in the alloblast procedure. However, the number of sessions can be increased upon request.
  • The results of stem cell therapy are obtained in a short time.
  • Tissue suspensions of both fibrocells and fibroblasts do not contain additives. Both processes are completely natural and only specialist physicians can perform these two applications.

How is Alloblast Stem Cell Therapy Done?

This process, which is provided by the reproduction of millions of new fibroblast cells in a GMP approved zero particle laboratory with a high technology system, is FDS approved. It is performed within critical procedures specific to fibroblast production techniques. Produced fibroblast cells are made ready for application by passing the quality control processes determined by the Ministry of Health and European Standards.

When the patient comes to the clinic, his skin is anesthetized with a local anesthetic cream. Alloblast stem cell, which comes with a personalized certificate, is injected into the desired area of the patient and applied.

-There is absolutely no risk of creating side effects (immune response). Because these cells are very young, they have not yet gained identity. They are also tested in a laboratory setting. Therefore, there is no such thing as side effects.

What are The Alloblast Application Stages?

The application phase of this stem cell therapy on the body is as follows;

  • First, the patient goes to the center where he will perform the procedure and preparations are made for the application.
  • Before starting the procedure, local anesthesia cream is applied to the patient. Thus, the area to be treated is anesthetized.
  • Fine-tipped needles are used during the procedure and the cell suspension is injected into the skin.
  • The skin should not be washed in the first 24 hours after the application is completed. At the same time, cosmetic products should not be used for 3 days.
  • Temporary mild redness may occur after treatment.
  • With Alloblast, which is a short-term and comfortable procedure, the skin problems of the person are eliminated at the cellular level.
  • These processes, which are carried out with the latest technological applications, provide long-term repair and regeneration of the skin.

How Many Sessions of Alloblast Stem Cell Therapy Are Applied?

For alloblast stem cell treatment, 5cc homogeneous cell solution prepared under laboratory conditions is used. After the preliminary examination, it is enough to apply a single session to eliminate the problem on your skin and to have a younger skin. It renews the skin in a single session. Depending on the needs of the person, age and skin damage, another session can be applied after 4-6 months, but it is not usually needed. Alloblast stem cell therapy can be applied not only to the face but also to other damaged parts of the body.

When Does Alloblast Stem Cell Therapy Work?

No pressure or liquid treatment should be applied to the skin for 24 hours after the application. After 24 hours, it is appropriate to take a warm shower. Make-up, etc. for 72 hours. Cosmetic substances and procedures should not be applied to the skin. Aesthetic procedures should be done 3 weeks after the request.

The effect is seen quickly after the injection. The final result is reached in 4-6 weeks after the injection, when allogeneic fibroblasts settle in the target area, begin to produce elastin and collagen, and the skin gradually regains its vitality.

As a result, the effects of Alloblast application begin to be seen very soon after the application, in about a month. Results are seen 4 times faster than Fibrocell, which is made from the person’s own tissue. Because the tissues used in Alloblast stem cell therapy are younger. They are cells that are healthier, more dynamic, and that have not been exposed to any adverse environmental factors until they are taken into tissue culture.

What Should Be Considered After Alloblast Application?

  • During the first 2 days after the application, care should be taken not to let the skin and the treatment area touch the water.
  • After 24 hours, you can take a shower with warm water.
  • Smoking and alcohol should not be taken after the application.
  • It is necessary to keep the treatment area clean.
  • Activities that increase blood circulation rate should be interrupted for a short time.
  • Make-up should not be applied for 3-4 days after the application and care should be taken not to use cosmetic products.
  • In the process after alloblast treatment, procedures such as laser and botox should not be applied for a certain period of time. For detailed information, information is given by experts.

Sign up for our Newsletter

Don’t worry we don’t send spam emails
Turkey Istanbul Medical Logo

The Ultimate Experience

We provide our patients with the information and useful medical advice they need for treatment, and to make decisions in conducting the necessary operations, Whether it is surgery or non-surgical. our certified doctors are dedicated to providing exceptional service to our patients.

MON-FRI10:00 – 20:00
Saturday10:00 – 17:00
Sunday12:00 – 17:00

TIM LLC .Licence No: A – 7042
Inonu Mh. Cumhuriyet Cd. No : 105/1